Sign in Register
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
You already sent us a question.
Please wait a few minutes
The AQUARIO NEO CO2 Diffusor U Type is an acrylic CO2 Diffusor. The special ceramic membrane produces a fine mist and the CO2 gets dissolved very quickly. Perfect for small and nano tanks.
If the lower part is completely filled with water, the bubbles can also be counted directly in the diffuser without any problems.
Before use, immerse the diffuser in water for 10 minutes so that all the air in the diffuser is displaced. If there is still air in the diffuser, larger bubbles may form at the bottom of the diffuser ceramic.
|AQUARIO NEO - CO2 Diffusor - U Type - Mini|
|Membrane diameter||12 mm|
|Fits hose||4/6 mm|
|Fits aquarium||20 bis 30 l nano aquarium, Dennerle Scaper's Tank 35 l oder Nano Cube, ADA Mini M|
|AQUARIO NEO - CO2 Diffusor - U Type - Medium|
|Membrane diameter||16 mm|
|Fits hose||4/6 mm|
|Fits aquarium||54 l standard aquarium (60x30x30 cm), Dennerle Scaper's Tank 50 l oder ADA 60-P|
|AQUARIO NEO - CO2 Diffusor - U Type - Large|
|Membrane diameter||23 mm|
|Fits hose||4/6 mm|
|Fits aquarium||112 l standard aquarium (80x35x40 cm)|
When algae start forming on your PETG equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. PETG-ware is easy to clean, however, it should be done diligently. After the cleaning process, your PETG products will be as good as new.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the PETG products you wish to clean are entirely covered
- Soak the PETG-ware in the solution for ½ - 1 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your PETG-ware should shine as if new
- Attention: Do not add vinegar to chlorine! Risk of death!
You'll find an extensive how-to (in German) with pictures in our Aquascaping Wiki under Glaswaren reinigen.
The manufacturer AQUARIO specialises in high-quality acrylic CO2 diffusers, very efficient bio- CO2 systems and other useful accessories for aquaristics. The Korean brand, which has been in existence since 2010, follows the guiding principle of offering every aquarist the opportunity to create a near-natural aquascape with the help of its product range. Therefore, AQUARIO offers very elegant and discreet aquarium accessories that do not disturb the layout of an aquarium. Furthermore, they are constantly working on optimising their products as well as expanding the product range with new innovations. Since 2019, the product range is available all over the world.
Simple the best there is on the market in terms of price/value! The acrylic material makes it very robust and not as fragile compaired to glass diffusers. Must have! (read more)
Simple the best there is on the market in terms of price/value! The acrylic material makes it very robust and not as fragile compaired to glass diffusers. Must have!
One of best diffusors I ever tried. Producing very small bubbles, its cheap and reliable. And its easy to clean too. Highly recommended stuff. (read more)
One of best diffusors I ever tried.
Producing very small bubbles, its cheap and reliable.
And its easy to clean too. Highly recommended stuff.
Not that i have experience with any other diffusers in the past, though it seems this one to be great. (read more)
Not that i have experience with any other diffusers in the past, though it seems this one to be great. It produces A LOT of very fine bubbles, though from the bottom below the edges some bigger bubbles do escape too now and then, it happened more during the initial start and its far better now, it might be something that happens at the beginning.
It is smaller than you can imagine (even the large one), so its quite easy to hide it somewhere or not to get distracted by it in the aquarium. It is also fine looking so i dont have an issue if its visible.
The acrylic glass it is made from seems great too.