Chihiros Stainless Steel CO2 Diffuser











Chihiros Stainless Steel CO2 Diffuser
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
The Chihiros stainless steel CO2 diffusers dissolve the CO2 running through them. Small CO2 bubbles are distributed in the tank and guarantee an optimal CO2 uptake by the water plants. The CO2 dissolves easily in the tank due to the fine dispersion of the Bubbles.
These CO2 diffusers come with two transparent suction cups, a 90 cm hose and a stainless steel clip are included.
The diffusors are made of 304 stainless steel wich looks great, is persistent, easy to clean, subtel yet pleasing to the eye.
Features
- With high-quality ceramic membrane
- Made of 304 stainless steel
- Compatible with pressurised CO2 supplying systems
- With connection for commercially available 4/6mm CO2 tubing
- 2 transparent suction cups included
- Replaceable ceramic membrane
- 90 cm hose included
- Stainless steel clip included
Dimensions
CO2 Diffusor 15 mm - 20 cm | |
---|---|
Total height | 190 mm |
Total width | 65 mm |
Diffusion area's diameter | 15 mm |
Diffusor diameter | 25 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 15 mm - 25 cm | |
---|---|
Total height | 265 mm |
Total width | 65 mm |
Diffusion area's diameter | 15 mm |
Diffusor diameter | 25 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 15 mm - 30 cm | |
---|---|
Total height | 295 mm |
Total width | 65 mm |
Diffusion area's diameter | 15 mm |
Diffusor diameter | 25 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
CO2 Diffusor 15 mm - 35 cm | |
---|---|
Total height | 355 mm |
Total width | 65 mm |
Diffusion area's diameter | 15 mm |
Diffusor diameter | 25 mm |
Diffusor height | 15 mm |
Distance between the pipes | 20 mm |
Cleaning
When algae start forming on your diffusor or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Stainless steel is easy to clean, however, it should be done diligently. After the cleaning process, your stainless steel products will be as good as new.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the products you wish to clean are entirely covered
- Soak the Stainless steelware in the solution for 1 to 4 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your Stainless steel should shine as if new
You'll find an extensive how-to (in German) with pictures on our community page Flowgrow.de under Glaswaren reinigen leicht gemacht