AQUARIO Neo Flow In-/Outflow Set Standard V.2

AQUARIO Neo Flow In-/Outflow Set Standard V.2

  • Shatterproof In-/Outflow Set made of PETG
  • Version 2
  • Stays transparent constantly
  • Available in two sizes
In stock, only 6 left
Free shipping on orders over € 60,- within Germany Change region
Express delivery possible
1-3 business days - order within the next 7 hours and 44 minutes and we’ll deliver tomorrow at the earliest
I want to order to 
incl. VAT
plus € 5,90 Shipping
Item is now in your shopping cart!
View my cart

Item question

We’re here for you!

Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.

Thank you for your question!

Thank you, we’ll get in touch!

Close window

You already sent us a question.

Please wait a few minutes


The AQUARIO Neo Flow In-/Outflow Set in Version 2 conveys aquarium water into the filter and back into the aquarium. It is made out of PETG (Polyethylene terephthalate modified with glycol), which - in the contratry to glass, regular plastic and stainless steel - is far more elastic.


Therefore, the Neo In- and Outflows are shatterproof and have a small bending radius.


In addition, PETG material provides a particularly high transparency. Before water contact, it seems matte, but as soon as it touches water, it becomes highly transparent.


Neo Flow Filter In- and Outflow

Due to the characteristics of the used PETG material, it is possible to cut the Neo Flow into the desired lenght by simply using a pipe cutter or small saw. Moreover, it is possible to rotate each part of the tubing by 360° and thus individualise the waterflow direction regarding the aquarium's needs.

Cleaning the Neo Flow is by far easier than cleaning stainless steel or glas in- and outflows because all the actual inflow and outflow parts are removable from the main tubes. Also, it is possible to clean the PETG with chlorine solution.


For cleaning, simply detach pipe and in-/outflow


The Inlet/outlet set version 2 can only be combined with the matching version 2 accessories.

The Set ML contains a filter Inflow with a 17 (16/22) mm diameter and an outflow with 13 (12/16) diameter.

In order to install the suitable filter guards Aquasabi Filter Guard Fine mesh , simply remove the last part of the filter inlet and attach the filter guard instead.


  • Stays transparent permanently
  • Made out of PETG (Polyethylene terephthalate)
  • Easily customised with pipe cutter or small saw
  • Easy to clean
  • Adjustable waterflow direction
  • Suitable Filterguard: Aquasabi Filter Guard Fine mesh



AQUARIO Neo Flow Set M Inflow - 13 mm
Height 230 mm
Width 70 mm
Space between pipes 41 mm
Depth of immersion 212 mm
Outer diameter of the pipe 13 mm
Suitable hose 12/16 mm
Suitable filter guard Aquasabi Filter Guard Fine mesh 13 mm
AQUARIO Neo Flow Set L Inflow - 17 mm
Height 290 mm
Width 75 mm
Space between pipes 45 mm
Depth of immersion 275 mm
Outer diameter of the pipe 17 mm
Suitable hose 16/22 mm
Suitable filter guard Aquasabi Filter Guard Fine mesh 17 mm


AQUARIO Neo Flow Set M Outflow - 13 mm
Height 320 mm
Width 70 mm
Space between pipes 42 mm
Depth of immersion 110 mm
Outer diameter of the pipe 13 mm
Suitable hose 12/16 mm
AQUARIO Neo Flow Set L Outflow - 17 mm
Height 392 mm
Width 75 mm
Space between pipes 42 mm
Depth of immersion 110 mm
Outer diameter of the pipe 17 mm
Suitable hose 16/22 mm


When algae start forming on your PETG equipment or when larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. PETG-ware is easy to clean, however, it should be done diligently. After the cleaning process, your PETG products will be as good as new.

  • You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
  • Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the PETG products you wish to clean are entirely covered
  • Soak the PETG-ware in the solution for ½ - 1 hours (depending on the severity of the stains)
  • Take it out and rinse thoroughly
  • Now all the stains ought to be gone, and your PETG-ware should shine as if new
  • Attention: Do not add vinegar to chlorine! Risk of death!

You'll find an extensive how-to (in German) with pictures in our Aquascaping Wiki under Glaswaren reinigen.



The manufacturer AQUARIO specialises in high-quality acrylic CO2 diffusers, very efficient bio- CO2 systems and other useful accessories for aquaristics. The Korean brand, which has been in existence since 2010, follows the guiding principle of offering every aquarist the opportunity to create a near-natural aquascape with the help of its product range. Therefore, AQUARIO offers very elegant and discreet aquarium accessories that do not disturb the layout of an aquarium. Furthermore, they are constantly working on optimising their products as well as expanding the product range with new innovations. Since 2019, the product range is available all over the world.

General information

Item no.
EAN 8809702871817
Weight 0,14 kg
Shipping weight 0,60 kg

Customers ask customers

You have questions about this product? Ask other customer or our support team about this product!

Customer reviews

This item has not been rated
Please sign in if you want to write a review. Sign in
5 Stars(0)
4 Stars(0)
3 Stars(0)
2 Stars(0)
1 Star(0)