Seachem PhosGuard
- Rapidly removes phosphate and silicate
- High binding capacity
- For fresh and marine water
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. PhosGuard is highly porous and beaded to allow water to flow easily through and around it, increasing both its efficiency and capacity.
Features
- Rapidly removes phosphate and silicate
- Highly porous for high capacity
- Easy to use
Usage
May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
Seachem
Seachem is a renowned manufacturer of aquarium fertilisers and water conditioners. For over 40 years, hobbyists and professionals have benefited from the innovative products. A wide range of aids such as Seachem Purigen or Seachem Matrix ensure crystal-clear water in the aquascape. Biological water conditioners for the aquarium are also offered with products such as Seachem Stabilty are also offered.
General information
Item no. |
|
EAN | 000116018708 |
Weight | 0,92 kg |
Shipping weight | 1,00 kg |
Customers ask customers
You have questions about this product? Ask other customer or our support team about this product!