Sign in Register
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
You already sent us a question.
Please wait a few minutes
The myAqua1.900 reverse osmosis system from ARKA quickly and effectively filters up to 99 % of salts, bacteria and pollutants, such as nitrate, phosphate and heavy metals, from tap water. This completely purifies all tap water and provides the basis for ideal aquarium water. myAqua achieves a water yield of up to 1:1 and contains only natural filter materials, without chemical additives. Four different filters are used for optimal effectiveness. The filtration starts with a fine filter that removes suspended matter. This is followed by the first carbon filter. This removes odours, discolouration, chlorine and other chemical components from the water. Now the tap water is passed through a filter membrane, which absorbs 99% of all pollutants, salts, pesticides, heavy metals and bacteria. Finally, the water enters a second carbon filter, which acts as an after-filter for final purification. A separately available resin filter can be used for filtering the finest residues of silicate, nitrate and other dissolved organic and inorganic substances. For reliable filtration, a change of media is indicated via LED and sound signal and the filters can be easily unscrewed from the anchorage on the osmosis system. The water tap supplied for the filtered osmosis water can be installed on any standard sink. An installation set is included in the scope of delivery.
myAqua reverse osmosis system set up
- Complete osmosis system for pure tap water
- Quickly and effectively filters out up to 99% of all substances in tap water
- Four different filter media included
- Mounting set included in the scope of delivery
- Extendable with a resin filter
|ARKA myAqua1.900 Reverse osmosis system|
|Daily output||1.900 Litres water|
|Osmosis water/residual water||Yield ca. 1 : 1 - 1,5|
|Salt retention||98% - 99%|
|Flow rate||max. 1,32 Litres/min|
|Operating pressure||1 - 4 Bar|
|Usable water temperature||5° - 38° C|
|Power consumption||70 W|
- Water tap
- 1.500 mm hose (supply)
- 3.000 mm hose (osmosis & waste water)
- T-piece incl. valve
- wall mounting
- TDS meter
- waste water clamp
- Water connection 3/4 - 1/4
- Shut-off valve 1/4 - 1/4
- Filter media
- Power supply unit