ADA AQUASKY RGB II 60

The ADA Aquasky RGB II 60 is a high-quality LED light that has been specially developed for aquatic plant aquariums and aquascapes. With its powerful RGB technology, it provides a natural and lively light that optimally supports the growth of the plants.

ADA Aquasky RGB II 60 on an ADA 60-P

The luminaire is equipped with 70 high-quality RGB LEDs and covers the optimal spectrum for lush plant growth. The colour temperature is in a range of 9,000 to 12,000 K and is thus neutral to cold. Contrasts and sharp transitions are particularly emphasised by this colour temperature. Thus, the ADA Aquasky RGB II 60 is an ideal lighting for an aquascape in the Iwagumi layout. But also Holland-style aquariums or reduced shrimp aquariums benefit from powerful lighting.

ADA Controller App Control

The ADA Controller App allows you to control the ADA Aquasky RGB II 60 from your smartphone or tablet via Bluetooth. Lighting ON/OFF, timer settings, brightness and light colour can be set. Manually created light colours are saved as presets and can be recalled at any time. In addition, the soft lighting mode setting allows the lighting to be switched on or dimmed gradually. The soft start after switching on the lamp makes the transition to the illuminated aquarium look more natural. This also means that the aquarium inhabitants are not frightened by a sudden change in the environment.

The ADA Aquasky RGB II - 60 is designed for aquariums with a length of 60 cm. It is made of high-quality materials and is slim and elegant. The titanium grey housing with fine cooling fins on the surface blends discreetly into any setup. It is an excellent choice for colourful and healthy aquatic plant aquariums, aquascapes and terrascapes.

• High-performance RGB LEDs for a natural and vivid light
• Controllable through ADA App
• Efficient and elegant design
• Titanium grey housing
• Optimal support of plant growths
• Soft start function for a gentle starting phase

Caution: Electricity hazard

Warning notes:

• This product is for indoor use only. Do not use it outdoors or in very humid or dusty areas.
• Do not disassemble or modify this product. It may cause fire, electric shock, or malfunction.
• Do not use the product if dropped – risk of fire or electric shock.
• Do not insert metal or flammable objects – risk of fire or electric shock.
• Avoid water. Electric shock risk. Stop use immediately if wet.
• Never touch power source with wet hands – electric shock risk.
• Do not cover Control Unit or AC adapter with cloth or flammable materials – fire risk.
• Do not damage power cord insulation with sharp objects – short circuit or fire hazard.
• Stop using immediately if cable is damaged – electric shock hazard.
• Keep AC adapter and Control Unit away from water – risk of electric shock.
• Do not look directly into the LED light.
• To avoid injury, KEEP OUT OF REACH OF CHILDREN.
• Connect AC adapter only after fully unplugging – otherwise risk of sparking.

General notes:

• ADA is not responsible for damage caused by improper installation, use, modification or incompatible power sources.
• Only use the supplied power cord with this AC adapter. Do not combine with other equipment.
• If repair is needed, send the product well packed to your local ADA distributor.
• Colour differences between the lighting body and the legs may occur due to material differences.

Handling notes:

• Do not drop or immerse the product in water.
• Keep the Lighting Unit, Control Unit, AC adapter and plug away from water – not waterproof.
• Use optional Power Cord S-70 for outlets below the aquarium to avoid water exposure.
• Do not place Lighting Unit directly on the floor – use only on aquarium tank.
• Do not use with external dimmer – control via the app only.
• Lighting unit becomes hot during use – allow to cool before touching.
• The LED light is not replaceable.
• Do not apply adhesive tape or expose to direct sunlight – discolouration risk.
• Do not use in places with poor power connections – flickering or blackout possible.
• Do not place near radio or TV – may cause interference.
• Do not pull the power cord when unplugging – always hold the adapter or plug.
• Always unplug before performing maintenance.
• Do not use hot water above 40°C, alcohol, thinner or benzene for cleaning.
• Remove dust from heat fins regularly – heat buildup reduces LED lifespan.
• Do not operate permanently at max brightness – may reduce component durability.
• Changing brightness may cause slight noise from the adapter – not a defect.
• Wipe off water, fertiliser or additives immediately to avoid corrosion.
• Do not apply excessive force to the legs – may result in improper installation.