WYIN CO2 Diffusor Aluminium Black
WYIN CO2 Diffusor Aluminium Black
Item question
We’re here for you!
Please enter your question and e-mail and we’ll contact you as soon as possible. It usually takes us up to 24 hours during business days to respond.
Thank you for your question!
Thank you, we’ll get in touch!
Close window
You already sent us a question.
Please wait a few minutes
Description
These aluminium CO2 diffusers by Wyin have an interesting design combined with high functionality. The membrane is especially fine-pored which makes a great distribution within the tank possible. The black colour is unobstrusive in darker corners of the aquarium and looks noble when placed in bright light. The CO2 dissolves easily in the tank due to the large ratio of surface to volume of the ceramic membrane.
These CO2 diffusers come with a combined J-Pipe. They are available in different lengths and colours so everyone can find the perfect diffusor for the own aquarium.
Features
- with high-quality ceramic membrane
- Made of high quality aluminium
- compatible with pressurised gas cylinders and limited compatibility with biological CO2 supplying systems (biological CO2 supplying systems need to produce at least a pressure of 1 bar)
- with connection for commercially available 4/6mm CO2 tubing
- transparent suction cups included
- Available in different colours
- Replaceable ceramic membrane
Dimensions
| CO2 Diffusor Aluminium - 265 mm | |
|---|---|
| Total height | 265 mm |
| Total width | 80 mm |
| Diffusion area's diameter | 25 mm |
| Diffusor diameter | 33 mm |
| Diffusor height | 12 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor Aluminium - 295 mm | |
|---|---|
| Total height | 295 mm |
| Total width | 80 mm |
| Diffusion area's diameter | 25 mm |
| Diffusor diameter | 33 mm |
| Diffusor height | 12 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor Aluminium - 355 mm | |
|---|---|
| Total height | 355 mm |
| Total width | 80 mm |
| Diffusion area's diameter | 25 mm |
| Diffusor diameter | 33 mm |
| Diffusor height | 12 mm |
| Distance between the pipes | 20 mm |
| CO2 Diffusor Aluminium - 385 mm | |
|---|---|
| Total height | 385 mm |
| Total width | 80 mm |
| Diffusion area's diameter | 25 mm |
| Diffusor diameter | 33 mm |
| Diffusor height | 12 mm |
| Distance between the pipes | 20 mm |
Cleaning
When larger and larger bubbles emerge from your ceramic diffusor it is time for cleaning. Membranes are easy to clean, however, it should be done diligently. After the cleaning process, your membrane products will be as good as new.
- Before cleaning the membrane it is essential to take it out of the diffusor, as the aluminium may be damaged in the cleaning process.
- You'll need a household bleach containing chlorine without perfumes. When working with chlorine bleach, please make sure you absolutely observe the manufacturer's safety notes.
- Pour some of the bleach into a container and mix with an equal amount of water. Mix so much of this solution that the membrane you wish to clean are entirely covered
- Soak the membrane in the solution for 1 to 4 hours (depending on the severity of the stains)
- Take it out and rinse thoroughly
- Now all the stains ought to be gone, and your membrane should work as if it was new
You'll find an extensive how-to (in German) with pictures on our community page Flowgrow.de under Glaswaren reinigen leicht gemacht