Matching the individuality, which the daytime LED lights provide, there are a number of different ways to install the lamp/s over your own tank. The adaptor or holder kits are exclusively made of high-quality materials such as an aluminum alloy with sea water resistance according to DIN 81249-1 and corrosion resistant stainless steel elements.

Practically a suitable adaptor or holder kit for every application can be found - both, pool-type tanks and tanks with a cover. Even upgrading an existing lightbar to LED lighting can be realized with little effort within a very short time.

• Suitable for pool-type aquariums
• Allows the use of the longest possible lighting profiles (profile width = tank width)
• The lamp is positioned about 60 mm above the edge, on which the lamp is placed
• Mounting bracket can be adjusted in width and adapt to the tank width
• Allows easy moving of the LED lamp
• Width: 14 cm

• Suitable for pool-type aquariums
• Due to the relatively large bending radius only the use of shorter lighting profiles is partly possible
• The lamp is positioned about 60 mm above the edge, on which the lamp is placed
• With non-slip rubber elements which guarantee stability and protect the glass edges
• The mounting bracket can be adjusted in width and adapt to the tank width
• Allows easy moving of the LED lamp
• Width: 14 cm

• Suitable for pool-type aquariums
• High-quality aluminum bars to connect 2-3 lamps
• Incl. cable suspension made from stainless steel
• Allows free suspension of the LED Lamps on the aquarium
• The height can be adjusted easily without any tool
• The length of the wire cables is 2 metres

• Suitable for tanks with cover
• Compact adaptor kit with universal applicability
• The fasteners can be adjusted to match the tank width
• The rubber pads protect the glass edges and ensure a non-slip grip

• Suitable for tanks with cover
• Compact adaptor kit with universal applicability
• For hanging or standing use
• Provided with holes, which also permit screwing on suitable surfaces
• The fasteners can be adjusted to match the tank width

• To convert an existing lightbar with T5 lamps (16 mm diameter)
• The fasteners can be adjusted to match the socket distance
• The electrical supply of the lamps is not made through the sockets
• The distance between the tube's bracket-middle and the lamp's lower edge is 45 mm

The length corresponds to the fluorescent tube without the contact pins.

• To convert an existing lightbar with T8 lamps (26 mm diameter)
• The fasteners can be adjusted to match the socket distance
• The electrical supply of the lamps is not made through the sockets
• The distance between the tube's bracket-middle and the lamp's lower edge is 45 mm

The length corresponds to the fluorescent tube without the contact pins.

• Allows mounting of the LED lamps on magnetic surfaces
• These magnetic elements replace the plastic thumbscrews of the head pieces
• Neodymium magnets with exceptional holding power
• Possibly painted metal surfaces and / or special alloys reduce the max. Holding force of the magnets